How to Specify a Zipper for a Custom Zip-Up Hoodie How to Specify a Zipper for a Custom Zip-Up Hoodie

How to Specify a Zipper for a Custom Zip-Up Hoodie

Date:2026-11-17 Author:bennyzhangexpo

Use this buyer’s checklist to turn your design preferences into decisions your supplier can confirm during sampling.

Choose the opening first

Confirm whether the front must separate completely, whether one or two sliders are needed and where the top stop should sit. A full front opening and a pocket opening have different requirements. Ask your trim supplier to confirm the proposed configuration.

Record the trim reference

Record the supplier reference, chain type, tape color, slider and puller. Mark the intended length and how it is measured on the drawing. When the garment length changes by size, ask for a zipper schedule by size. Approve a physical trim sample against your fabric and artwork.

Check the zipper on the finished sample

Review the zipper both open and closed. Check whether the hem and pocket edges align, whether the tape ripples, and whether the slider catches the fabric or rubs at the neck. Agree on care checks and review the sample again afterward. Use the funnel-neck hoodie concept to discuss clearance at a high neckline.

Approve a named reference

Write the approved trim code and finished sample revision in the bill of materials. If the proposed zipper changes, ask for an updated sample before releasing the order.

Send your design brief and sample requirements to Pindon Apparel to discuss development. WhatsApp: +8613192081148 | Benny